All prices are in All prices are in AUD
This is a Make-A- Vent KIT you cut and trim the main seal to fit .
The upright seal clips into the channel .
Kit contains instruction leaflet
2 x Main seals pre-formed and 2 x upright seals...
" Make A Vent " system is basic material correct for the model.
Comes with instructions included.
Kit contains material for TWO front or rear opening vents
You trim in the final shape for a great result...
Austin SHEERLINE Front Quarter Vent seals
Sold as: Pair
Sold as a KIT with upright seal for your front quarter vent windows..
Can also be used on Early Bedford Turcks.
Instruction sheet is included.
SOLD IN 1.4 MTR LENGTHS MAKES 2 SEALS This section fits into the frame and is reversed from side to side. Make an angle cut to create the corner For Aussie Chevrolet trucks only, triangle style quarter vent...
Make-A-Vent rubbers. (you trim to allow window to move)
Sold as PAIR pre-formed radius corner.
Fits into narrow track in the door
Sizes for track width 11-12 mm x 6mm...
Glue in upright seal sold in pairs 2x 500mm
Use our toolbox adhesive for best results.
Various makes and models.
This is uncured rubber .75mm thick x 38mm wide
For fitting Glass to Chrome frames 1/4 vents and screens.
Sold by the mtr.
Sold in PAIRS with pre formed radius corner.
Instruction sheet included.
Sold in 1.8 mtr lth. will make 2 vent rubbers.
You may need an upright seal for the back edge of your glass.
222-005 and the others. Our super glue works great on this material.
Cut and trim alternate sides to make your vent rubber.
Our super glue is just what you need on this job.
Max width of flaps is 32mm . the block is 16mm x 10mm
Sold in 1.8 mtr. lengths
Check base size of the frame in your vehicle.
Width of flaps is 32mm. the block is 13mm x 5mm nominal sizes may vary.
Sold in 1.8 mtr. lengths. Makes 2 front Quarter vent seals.
Use our super glue to re...
This seals the upright side of the glass on your Quarter vent window when closed.
Fits into the metal upright opposite side to your wind up window.
Sold in pair
Is included in ALL our AUSTIN...
SOLD IN PAIRS.
SIZE base fits channel 15 wide and 9mm deep
total width at edge of flaps 33mm
total height from base to tips 21mm
SOLD IN PAIRS
SIZE base fits channel 13mm wide and 6mm deep
total width is 33mm
total height to tips 18mm
This is generally what you will find when you lift the boot mat in an …
Welcome to the old~era blog!Here, we love to share some of the …
All prices are in AUD. © 2021 Old~Era Services.
Shopping Cart Software by BigCommerce