Austin A30

Seals filler neck to body Austin A30-35

 Set of 4 fit to underside of sill panels.

 For 2 door sedans only:  installs behind bailey channel rail and outer edge of door. Sold as Pair.

 One piece screen rubber ready to install. Dry fit first . THEN SEAL GLASS SIDE  OF RUBBER  THEN  RUBBER TO BODY  USE ONLY MASTIC SEALER    CLEAN WITH TURPES OR KERO. THIS IS A ONE...

 For fixed window in back door A30.  Install then use Mastic sealer, to seal the glass side, and then body side of rubber. These are SOLD IN PAIRS THE OPENING VENT RUBBERS ARE AVAILABLE. SEE: Part No...

Austin  A30 4 door sedan: fits to door window opening behind bailey channel rail. Finishes body edge. Sold per Pair as a Kit

 Front floor with seat retainers fitted. Finished in etch primer.

Ready to weld in,with inspection plate and seat mounts..

Gasket type, Ready joined to fit your glass

 Sold in pairs: fits into pocket on side of engine bay

 Sold in Pairs: fits into pocket near bonnet hinges.

 Sold in pairs: all A30-35 Austins

Equal sided Quad HOLLOW sponge glues onto door.  12.5 mtrs. Enough for all 4 doors   Size 13mmx13mm on flats . make sure you use our 3M adhesive for this job. Item No. 613-011

  This is a Make-A- Vent  KIT   you cut and trim the main seal to fit . The upright seal clips into the channel . Kit contains instruction leaflet 2 x Main seals pre-formed and 2 x upright seals...

 Suitable for various Austin, BMC vehicles. These go TOGETHER with our  A40 rocker cover gasket for an all time good job SOLD IN PAIRS.

Material for 2 front doors.  5mtrs Slides into existing metal channel. Also see 241-0374 4 door sedan mounting rubber and 241-0372 for 2 door

 material to install 2 door cards. for AS3 models fuel filler R H  rear guard Join this material with Our 3m super glue.  

Enough material for all 4 door cards. Suits AS3 models Fit to door first, cut 10mm longer then superglue together. Use our 3M super glue for rubber.

The ADHESIVE for door and boot rubbers.  Tube contains 147mls.  Black in colour

Sold as pairs:  fits to headlight under rim as a dust seal.

Fits headlight bucket, to the front guard  SOLD IN PAIRS

Holds lens into early wide chrome rim. LUCAS park light. Sold in pairs

Lucas park light boot  single contact style From body flange to tip at rear is 55mm. 3 mounting holes to body.

 Takes dual contact elect fitting.LUCAS Depth is 75mm  and takes original chrome ring on the front. Sols as each.

SOLD IN PAIRS:  for many English vehicles with LUCAS system. Austin A30 and others

 EPDM rubber as a mounting PAD for parts to paint work etc. Comes in a 200mm x 200mm square nominate your size in lots of 200x200

Universal Overrider mount material: Plastic. Sold Per Mtr.

 Slip on pedal pads sold in Pairs. Also see pedal shaft seal :  240-374

 Lower arm bush at chassic set of 8